Secure the brackets to the stairs using appropriate heavy-duty wood screws or masonry anchors, depending on your staircase material.
Every page of the manual repeats critical warnings. Here are the non-negotiables:
Slide the rail sections together, ensuring a seamless butt-joint. Any gap or lip will cause a bumpy ride or carriage stalls. thyssenkrupp levant stair lift installation manual
The rail supports an inclination between 28° and 53° .
The installer measures the staircase’s length, width, and angle, as well as the height of each step, to ensure a proper fit. Secure the brackets to the stairs using appropriate
: Free versions focusing on operation (but not full installation) are hosted on platforms like Key Installation Components
Add the required overhang specified in the manual (typically 6 to 8 inches past the top nose to allow the carriage to reach landing height). Any gap or lip will cause a bumpy ride or carriage stalls
Once the rail is perfectly level and aligned, fasten it tightly to the brackets. 3. Installing the Carriage and Chair Unit
Ensure at least 2 inches (50 mm) of clearance between the top chassis and any obstruction.
A standard 220/240V wall socket near the top or bottom of the stairs for the transformer. Tools Needed:
Sections of extruded aluminum track featuring the gear rack.